Roofing in Jensen Beach, FL
Roof repairs, replacements, and new installs for Jensen Beach homes and businesses — metal, tile, shingle, and flat systems built for the salt air, sun, and storms of the barrier island and beyond.
Our Jensen Beach Roofing Services
Residential roofing
New roofs and re-roofs for Jensen Beach homes and condos.
Commercial roofing
TPO, flat, and metal systems for businesses and properties.
Roof repair
Fast, lasting fixes for leaks, storm damage, and worn flashing.
Roof replacement
Full replacements installed to current Florida wind code.
Roofing Systems We Install in Jensen Beach
Metal & standing seam — ideal for salt-air coastal durability
Tile — concrete and clay, classic Florida looks
Asphalt shingle — affordable, wind-rated options
Flat & low-slope (TPO) — for additions, condos, and commercial roofs
What Roofing Costs in Jensen Beach
Repairs from a few hundred · replacements ~$9k–$36k+
Your number depends on material, roof size and pitch, and whether it's a repair or full replacement. We inspect first and give you a clear, itemized estimate — see our Florida roof cost guide for 2026 prices by material.
Storm-Ready Coastal Roofing
Jensen Beach's barrier-island exposure makes a wind-rated, properly installed roof essential. We build to current code and document the wind-mitigation details that protect your home — and may lower your insurance. Storm already hit? See our Florida storm damage & roof insurance guide.
Jensen Beach Roofing FAQs
Do you serve Jensen Beach?
Yes — Jensen Beach, Hutchinson Island, and the surrounding Martin County communities.
What roofing material is best here?
Metal (especially aluminum) and tile handle salt air and wind well, but the right choice depends on your home, budget, and goals.
How fast can you get to an active roof leak?
We prioritize active leaks and can often inspect quickly and tarp the same visit to stop water from spreading.
Are you licensed and insured?
Yes — Leeward Roofing is a licensed Florida roofing contractor (CCC1337211) and fully insured.
Roofing Across the Treasure Coast
Beyond Jensen Beach, Leeward Roofing serves Stuart, Palm City, Hobe Sound, Port St. Lucie, Fort Pierce, Vero Beach, and the surrounding Martin, St. Lucie, and Indian River County communities.
Martin County storm damage? Don't let the second rain in.
Stuart, Palm City, Jensen Beach and Hobe Sound all take direct coastal wind, and Martin County plan review is not instant — so getting the damage documented early matters as much as the tarp itself.
- Walk the perimeter and look for granules washed into the gutters and downspouts.
- Photograph soffit, fascia and gutter damage — adjusters ask for it.
- Tarp first, then worry about the permanent repair.
- Be wary of out-of-state crews that appear the day after a storm.
Recent Leeward jobs
Real Treasure Coast roofs installed by our own crews — not stock photography.
Permitting and code in Jensen Beach
Who issues the permit
Work in Jensen Beach is permitted through the Martin County Building Division. Jensen Beach is unincorporated Martin County. The county runs Accela with a digital plan room, and initial plan review commonly takes about 10–21 days. We pull it, schedule the inspections, and meet the inspector — none of that lands on you.
What the code actually requires
Martin County enforces the Florida Building Code and its ASCE 7-22 wind provisions. Martin is not an HVHZ county; only Miami-Dade and Broward are. What does bite here is timing — county plan review commonly runs about 10–21 days, so we submit early rather than promising you a start date we cannot hold. Re-roof applications need the Florida Product Approval or Miami-Dade NOA for the exact system being installed — that is the piece most often missing when a permit stalls.
What we see on Jensen Beach roofs
Coastal exposure with a lot of tile and low-slope tie-ins over additions and lanais.
Wind mitigation, while we are up there
Insurance credits for wind mitigation are worth real money annually, but only if the inspection form can be completed truthfully. We build the roof so it can be, and hand you the photos. How wind mitigation credits work →
Jensen Beach sits between two bodies of water, and both attack the roof
Indian River Lagoon on one side, Atlantic on the other, with Hutchinson Island taking the full force of it.
Martin County issues your permit, not a city
Jensen Beach is unincorporated, so the Martin County Building Department handles it rather than the City of Stuart. That is a genuine practical difference: different submittal packet, different inspection queue, different people. We confirm and file before you have to think about it.
Wind speeds among the highest we work to
Martin County carries higher ultimate design wind speeds than Indian River or St. Lucie — generally in the 165–175 mph range depending on location. Every fastener schedule, edge metal gauge and product approval on your roof is selected against that number. A spec written for a Sebastian roof is not compliant here.
Hutchinson Island is Exposure D, and then some
Open Atlantic upwind puts the island in Exposure D under FBC R301.2.1.4.3. Stack that on Martin County wind speeds and the corner and perimeter design pressures are the most demanding in our service area. This is where cheap fastening schedules get found out.
Salt from two directions
Most coastal homes get salt off one body of water. Jensen Beach and the island get lagoon air and ocean air, and the lagoon is frequently the more aggressive of the two because it is shallower, warmer and less flushed. Fasteners, drip edge, valley metal and vent hoods corrode here faster than almost anywhere else we work — which is exactly why we specify corrosion-resistant hardware as standard rather than as an option.
Wind-borne debris region
Coastal Martin County requires opening protection. It reads as a windows issue but it is a roofing one: a failed window or garage door pressurises the house and pushes the roof deck up while wind pulls it from above. That combination takes roofs off whole.
What that adds up to
On the island and the exposed waterfront, standing seam metal is usually the only system we will recommend without caveats — no exposed fasteners for salt to find. Inland Jensen Beach is a more open conversation.
What we see on Jensen Beach roofs
The failure order here is hardware first, covering second. Almost always.
Corroded fasteners and flashing
The number one finding on this stretch. Shingles or tile that look serviceable sitting over drip edge, valley metal and vent hoods that are visibly going. Replacing the covering without replacing the metal is money wasted.
Hutchinson Island condos and low-slope
Association-governed buildings with low-slope membrane, rooftop equipment and phasing requirements so residents stay put. See flat & low-slope roofing.
Tile underlayment at end of life
The 1980s and 1990s tile stock is squarely in underlayment replacement territory. Lift-and-relay reuses your tile and avoids discontinued-profile sourcing.
Pipe boots, cooked early
UV plus salt finishes rubber boots faster here than inland. If yours are past eight years on an exposed roof, they are worth checking regardless of how the rest looks.
Older Jensen Beach village stock
Smaller, cut-up roofs with additions and low-slope transitions. The leaks are at the junctions, and patching the stain rarely finds them.
Storm exposure
This stretch takes named storms directly. Broken seal strips and creased tabs after a blow are the norm, and neither is visible from the ground. See hurricane roof damage.
Jensen Beach roofing FAQs
Who issues my roofing permit in Jensen Beach?
Martin County. Jensen Beach is unincorporated, so it does not go through the City of Stuart Building Department - a separate authority with its own submittal packet and inspection queue. We confirm jurisdiction, pull the permit and meet the inspector.
Why do roofs fail faster in Jensen Beach?
Salt from two directions. Most coastal homes get exposure off one body of water; Jensen Beach and Hutchinson Island get the Indian River Lagoon on one side and the Atlantic on the other. The lagoon is often the more aggressive because it is shallow, warm and less flushed. It attacks the metal - fasteners, drip edge, valley metal, vent hoods - long before the covering wears out.
What roof is best for Hutchinson Island?
Standing seam metal, in most cases, and we say that as a company that installs everything. It has no exposed fasteners for salt to corrode, which is the actual failure mode here, and it carries the uplift pressures that Exposure D plus Martin County wind speeds produce. See metal roofing.
What is the design wind speed in Jensen Beach?
Martin County generally runs in the 165 to 175 mph ultimate design wind speed range depending on exact location - higher than Indian River or St. Lucie County. It drives fastener type and spacing, edge metal gauge and which products are approved for use. A quote written for a Sebastian roof does not transfer here.
My tile looks fine but the roof leaks. Why?
The underlayment beneath it has failed. Tile is a rain screen; the membrane underneath does the waterproofing and fails at roughly 20 to 25 years while tile may have decades left. A lift-and-relay replaces the underlayment and relays your original tile.
Do you work on Hutchinson Island condo associations?
Yes. Association work is phased so residents stay put, with a written schedule you can circulate to owners and a documented close-out package for the asset file.
How much does a roof cost in Jensen Beach?
Most reroofs land between $15,000 and $42,000. Coastal and island addresses sit at the upper end because of Exposure D detailing, corrosion-resistant hardware throughout and Martin County wind speeds - all of which are real requirements rather than upsells.
How fast can you respond to a leak here?
Jensen Beach is roughly an hour from our Sebastian shop and a regular route. Active leaks are prioritised and we can usually inspect within 24 hours and tarp on the same visit.
Should I file an insurance claim after a storm?
Only if the damage plausibly exceeds your hurricane deductible, which is usually a percentage of dwelling coverage rather than a flat amount. Florida gives you one year from the date of loss to file. See our Florida roof insurance claim guide.
Are you licensed for Martin County work?
Yes - Florida state certified, CCC1337211, fully insured with general liability and workers compensation. Verify any Florida contractor at myfloridalicense.com before letting them on your roof.
We also work near Jensen Beach
Same crews, same trucks — these are the communities immediately around Jensen Beach that we cover from the Sebastian shop.
Let's take a look at your roof. Free.
No pressure, no obligation, and an honest answer even when that answer is "you don't need a new roof yet."
- Free, itemized estimate in writing
- Most inspections scheduled within 24 hours
- We handle permits and insurance paperwork
- Licensed CCC1337211 and fully insured
Request your free estimate
Four quick fields. That's all we need.